This compact inverter plasma cutter slices through steel, stainless and aluminum with a clean, narrow kerf — far faster and neater than an abrasive wheel. It runs on either 120V or 240V power and weighs about 10 lbs, so it goes wherever the work is. Bring compressed air (a compressor is required and rents separately).
| Specification | Details |
|---|---|
| Output Current | Up to 45 A on 240V (approx. 35 A on 120V) |
| Clean Cut | 5/16 in (8 mm) |
| Max Severance | Approx. 1/2 in (12 mm); up to 3/4 in on 240V at reduced quality |
| Input Power | Dual voltage — 120V / 240V, 50/60 Hz |
| Duty Cycle | 60% |
| Air Supply | Requires compressed air (approx. 55–75 PSI) |
| Weight | Approx. 10 lbs (machine only) |
Cuts Most Metals: Carbon steel, stainless, aluminum and copper — anything electrically conductive.
Dual Voltage: Runs on a standard 120V outlet for light work or 240V for full cutting power.
Clean, Fast Cuts: Narrow kerf and minimal heat-affected zone compared to torches or abrasive wheels.
Truly Portable: At about 10 lbs it carries in one hand to rooftops, crawl spaces and remote repairs.
Common uses: cutting sheet and plate steel; demolition and salvage cuts; HVAC and ductwork modifications; auto-body and trailer repair; fabrication and gate/fence work.
